CANNA Feeding Charts

BIOCANNA is CANNA's 100% organic range, specially designed to offer environmentally friendly cultivation and respect the natural plant cycle. Made from natural plant and mineral ingredients, BIOCANNA nutrients are fully certified for organic farming and guarantee optimal nutrient uptake while preserving soil biodiversity.

Unlike classic mineral nutrients, BIOCANNA fertilizers not only feed the plants but also the soil's microbial life, thus improving the substrate structure and nutrient retention. Suitable for indoor growers, this range allows for tasty harvests, rich in aromas and active ingredients, while respecting the natural ecosystem.

Growth Phase (Vegetative)

Root Formation (Days 1 to 5)

• Bio Vega: 15-20 ml/10L
• Bio Rhizotonic: 40 ml/10L

Vegetative Development (Weeks 1 to 4)

• Bio Vega: 20-30 ml/10L
• Bio Rhizotonic: 20 ml/10L (until the 2nd week)

🌸 Flowering Phase

Start of Flowering (Weeks 5 and 6)

• Bio Flores: 30-40 ml/10L
• Bio Rhizotonic: 5 ml/10L
• BioCanna Boost: 20-40 ml/10L

Flower Enlargement (Weeks 7 and 8)

• Bio Flores: 30-40 ml/10L
• Bio Rhizotonic: 5 ml/10L
• BioCanna Boost: 20-40 ml/10L

End of Flowering and Ripening (Weeks 9 and 10)

• Bio Flores: 20-30 ml/10L
• BioCanna Boost: 20-40 ml/10L

Flushing (Weeks 11 and 12)

• Pure water only
• BioCanna Boost: 20-40 ml/10L (To maximize flavor, it is better to stop using stimulators at this stage).

Advantages of organic cultivation with Biocanna

✅ No pH correction is necessary except in cases of extremely hard water (pH > 7.5).

CANNA Aqua: Perfect for Closed Loops

CANNA Aqua is a nutrient specially designed for closed-loop hydroponic systems, such as NFT (Nutrient Film Technique), DWC (Deep Water Culture) or water recirculation systems. Unlike traditional hydroponic methods, where the nutrient solution is drained after each watering, closed-loop systems continuously reuse the nutrient-enriched water.

Thanks to a unique composition, the nutrients Aqua Vega and Aqua Flores provide an optimal balance of nutrients in the water, stabilizing the pH and maximizing the absorption of essential elements by the plants. Combined with additives like Rhizotonic (root stimulation), Cannaboost (flowering accelerator) and Cannazym (enzymes for a healthy root system), these fertilizers guarantee rapid growth, explosive flowering, and abundant harvests.

Ideal for growers using advanced hydroponic systems, CANNA Aqua offers precise nutrient control, allowing optimal growth throughout the plant life cycle. Discover below the Aqua feeding chart, designed to maximize yields in closed hydroponics.

🌿 Growth Phase (Vegetative)

Root Formation (Days 1 to 5)

• Aqua Vega A + B: 15-25 ml/10L
• Rhizotonic : 40 ml/10L
• Recommended EC : 0,7 - 1,1
• Recommended pH : 5,2 - 6,2

Vegetative Development (Weeks 1 to 4)

• Aqua Vega A + B: 20-35 ml/10L
• Cannazym: 25 ml/10L
• Recommended EC : 0,9 - 1,3
• Recommended pH : 5,2 - 6,2

🌸 Flowering Phase

Start of Flowering (Weeks 5 and 6)

• Aqua Flores A + B: 30-40 ml/10L
• Cannazym: 25 ml/10L
• Cannaboost: 20-40 ml/10L
• PK 13/14 (Week 6): 20 ml/10L
• Recommended EC : 1,2 - 1,6
• Recommended pH : 5,2 - 6,2

Flower Development (Weeks 7 and 8)

• Aqua Flores A + B: 30-40 ml/10L
• Cannazym: 25 ml/10L
• Cannaboost: 20-40 ml/10L
• Recommended EC : 1,8 - 2,2
• Recommended pH : 5,2 - 6,2

Flower Swelling (Weeks 9 and 10)

• Aqua Flores A + B: 20-30 ml/10L
• Cannazym: 25 ml/10L
• Cannaboost: 20-40 ml/10L
• Recommended EC : 1,4 - 1,8
• Recommended pH : 5,2 - 6,2

Maturation and Rinsing (Weeks 11 and 12)

• Pure water only
• Cannaboost: 20-40 ml/10L
• Recommended EC : 0,0 - 0,4
• Recommended pH : 5,2 - 6,2

💡 Tips for Successful Cultivation with CANNA Aqua

✅ Carefully monitor pH and EC: in a closed system, nutrients remain in circulation and can accumulate. Regularly adjust the pH between 5.2 and 6.2 to avoid blockages.
✅ Control the water temperature: ideally between 18 and 22°C, to avoid root stress and maximize nutrient uptake.
✅ Add Cannazym regularly: it helps break down dead roots and maintains a healthy environment in the reservoir.
✅ Use Cannaboost from the start of flowering to improve flower production and harvest quality.

With CANNA Aqua, enjoy all the benefits of closed-loop hydroponics, with optimized fertilization and exceptional yields!

Feeding chart CANNA Hydro Soft Water

CANNA Hydro for Soft Water is specially designed for open hydroponic systems (drain-to-waste) using low mineralized water. Unlike closed-loop systems, here the nutrient-enriched water is drained after each watering, which requires a perfectly balanced nutrient solution to ensure optimal absorption.

CANNA nutrients Hydro Vega (growth) and Hydro Flores (flowering) are formulated for rapid nutrient uptake, ensuring vigorous plants and abundant flowering. Thanks to pH stabilizers, this range reduces pH fluctuations and facilitates nutrient solution management. Combined with the stimulators Rhizotonic (root development), Cannaboost (flower stimulation), and Cannazym (enzymes for a healthy root system), these nutrients ensure generous and quality harvests.

Growth Phase (Vegetative)

Root Formation (Days 1 to 5)

• Hydro Vega A + B : 15-25 ml/10L
• Rhizotonic : 40 ml/10L
• Recommended EC : 0,7 - 1,1
• Recommended pH : 5,2 - 6,2

Vegetative Development (Weeks 1 to 4)

• Hydro Vega A + B : 20-35 ml/10L
• Cannazym: 25 ml/10L
• Recommended EC : 0,9 - 1,3
• Recommended pH : 5,2 - 6,2

🌸 Flowering Phase

Start of Flowering (Weeks 5 and 6)

• Hydro Flores A + B : 25-35 ml/10L
• Cannazym: 25 ml/10L
• Cannaboost: 20-40 ml/10L
• PK 13/14 (Week 6): 20 ml/10L
• Recommended EC : 1,2 - 1,6
• Recommended pH : 5,2 - 6,2

Flower Development (Weeks 7 and 8)

• Hydro Flores A + B : 25-35 ml/10L
• Cannazym: 25 ml/10L
• Cannaboost: 20-40 ml/10L
• Recommended EC : 1,8 - 2,2
• Recommended pH : 5,2 - 6,2

Flower Swelling (Weeks 9 and 10)

• Hydro Flores A + B : 20-30 ml/10L
• Cannazym: 25 ml/10L
• Cannaboost: 20-40 ml/10L
• Recommended EC : 1,1 - 1,5
• Recommended pH : 5,2 - 6,2

Maturation and Rinsing (Weeks 11 and 12)

• Pure water only
• Cannaboost: 20-40 ml/10L
• Recommended EC : 0,0 - 0,4
• Recommended pH : 5,2 - 6,2

✅ Add calcium and magnesium if necessary: Since Soft Water is low in minerals, adding CalMag can be beneficial to prevent deficiencies.
✅ Monitor pH and EC: Although stabilized, the nutrient solution may require slight adjustments depending on the type of plant grown.
✅ Maintain an ideal water temperature: 18 to 22°C to avoid root stress and improve nutrient absorption.
✅ Add Cannazym regularly: It helps maintain healthy roots and prevents the accumulation of organic residues in the hydroponic system.
✅ Use Cannaboost from the beginning of flowering to maximize flower production and improve the taste quality of the harvests.

Feeding chart CANNA Hydro Hard Water

The CANNA Hydro nutrient range for Hard Water is specially designed for open hydroponic systems (drain-to-waste) using water rich in minerals (limestone, magnesium). Unlike systems requiring Soft or osmosis water, Hard Water already contains a significant amount of calcium and magnesium, which can influence nutrient uptake and cause imbalances.

With an optimized composition, the Hydro Vega (growth) and Hydro Flores (flowering) nutrients guarantee a balanced supply of nitrogen, phosphorus, and potassium while avoiding excess mineral salts. These nutrients include pH stabilizers, which reduce the need for frequent pH adjustments. Combined with the stimulators Rhizotonic (root development), Cannaboost (flower stimulation), and Cannazym (enzymes for a healthy root system), these fertilizers enable rapid growth, abundant flowering, and high-quality harvests.

Discover below the CANNA Hydro feeding chart for Hard Water, designed to maximize growth and flowering in hydroponics. 🚀💦

🌿 Growth Phase (Vegetative)

Root Formation (Days 1 to 5)

• Hydro Vega A + B : 10-20 ml/10L
• Rhizotonic : 40 ml/10L
• Recommended EC : 0,7 - 1,1
• Recommended pH : 5,8 - 6,2

Vegetative Development (Weeks 1 to 4)

• Hydro Vega A + B : 15-30 ml/10L
• Cannazym : 25 ml/10L
• Recommended EC : 0,9 - 1,3
• Recommended pH : 5,8 - 6,2

🌸 Flowering Phase

Start of Flowering (Weeks 5 and 6)

• Hydro Flores A + B : 25-35 ml/10L
• Cannazym: 25 ml/10L
• Cannaboost: 20-40 ml/10L
• PK 13/14 (Week 6): 20 ml/10L
• Recommended EC : 1,2 - 1,6
• Recommended pH : 5,8 - 6,2

Flower Development (Weeks 7 and 8)

• Hydro Flores A + B : 25-35 ml/10L
• Cannazym: 25 ml/10L
• Cannaboost: 20-40 ml/10L
• Recommended EC : 1,8 - 2,2
• Recommended pH : 5,8 - 6,2

Flower Swelling (Weeks 9 and 10)

• Hydro Flores A + B : 20-30 ml/10L
• Cannazym: 25 ml/10L
• Cannaboost: 20-40 ml/10L
• Recommended EC : 1,1 - 1,5
• Recommended pH : 5,8 - 6,2

Maturation and Rinsing (Weeks 11 and 12)

• Pure water only
• Cannaboost: 20-40 ml/10L
• Recommended EC : 0,0 - 0,4
• Recommended pH : 5,8 - 6,2

Tips for Successful Cultivation with CANNA Hydro Hard Water

✅ Beware of excess calcium and magnesium: Hard Water already contains these minerals in large quantities, so avoid adding CalMag supplements.
✅ Monitor pH and EC: Even if the solution is stabilized, minor adjustments may be necessary to avoid blockages.
✅ Maintain an ideal water temperature: 18 to 22°C to avoid root stress and improve nutrient absorption.
✅ Add Cannazym regularly: It helps maintain healthy roots and prevents the accumulation of organic residues in the hydroponic system.
✅ Use Cannaboost from the beginning of flowering to maximize flower production and improve the taste quality of the harvests.

Feeding chart CANNA Coco

The CANNA Coco range is specially designed for cultivation in coco fiber substrate, an airy medium that retains moisture well while ensuring excellent drainage. Unlike substrates like potting soil or hydroponic systems, coco is an inert support, which means plants must receive all nutrients through watering.

With the Coco A & B nutrients, CANNA offers a balanced formulation in calcium, magnesium, nitrogen, phosphorus, and potassium, thus avoiding deficiencies frequently observed on this type of substrate. Thanks to pH stabilizers, adjustments are minimized, making this method ideal for both beginners and experienced growers.

To boost the performance of your coco culture, CANNA recommends adding growth and flowering stimulators, such as Rhizotonic (root development), Cannazym (enzymes for a healthy root system), and Cannaboost (flower stimulation). With this adapted feeding chart, you will optimize the growth and flowering of your plants to obtain abundant and high-quality harvests.

🌿 Growth Phase (Vegetative)

Root Formation (Days 1 to 5)

• Coco A + B : 15-25 ml/10L
• Rhizotonic : 40 ml/10L
• Recommended EC : 0,7 - 1,1
• Recommended pH : 5,5 - 6,2

Vegetative Development (Weeks 1 to 4)

• Coco A + B : 20-35 ml/10L
• Cannazym: 25 ml/10L
• Recommended EC : 0,9 - 1,3
• Recommended pH : 5,5 - 6,2

🌸 Flowering Phase

Start of Flowering (Weeks 5 and 6)

• Coco A + B: 30-40 ml/10L
• Cannazym: 25 ml/10L
• Cannaboost: 20-40 ml/10L
• PK 13/14 (Week 6): 20 ml/10L
• Recommended EC : 1,2 - 1,6
• Recommended pH : 5,5 - 6,2

Flower Development (Weeks 7 and 8)

• Coco A + B: 30-40 ml/10L
• Cannazym: 25 ml/10L
• Cannaboost: 20-40 ml/10L
• Recommended EC : 1,8 - 2,2
• Recommended pH : 5,5 - 6,2

Flower Swelling (Weeks 9 and 10)

• Coco A + B: 20-30 ml/10L
• Cannazym: 25 ml/10L
• Cannaboost: 20-40 ml/10L
• Recommended EC : 1,1 - 1,5
• Recommended pH : 5,5 - 6,2

Maturation and Rinsing (Weeks 11 and 12)

• Pure water only
• Cannaboost: 20-40 ml/10L
• Recommended EC : 0,0 - 0,4
• Recommended pH : 5,5 - 6,2

💡 Tips for Successful Cultivation with CANNA Coco

✅ Water regularly: The coco substrate dries faster than potting soil. Frequent watering (daily or every 2 days) is recommended.
✅ Monitor drainage: Ensure the substrate is never saturated with water to prevent mold development.
✅ Add Cannazym throughout the cycle: This helps recycle organic residues and promotes root regeneration.
✅ PK 13/14 is used only for one week in the middle of flowering to maximize flower swelling.
✅ Rinse the substrate well before harvest to improve the flavor and quality of the crops.

⬆️ Top of page